Selected region:
World
Click to change
Up to 7 panels max
Want to power a whole shelf of panels?
This power supply will do the perfect job.
You can find even stronger ones on amazon, as long as it's 24v, you're good to go.
With this meanwell power supply you can power up to 7 PicoFarmLED panels at 100% power.
Welcome to PicoFarmLED!
In this little guide we will go through setting up the PicoFarmLED panel with arduino.
Any arduino compatible board should work, just make sure it's either 3.3v or 5v with PWM output. Which is probably the case of 90% of them.
This guide will help you create your own automation program, if you are looking for a ready-to-go firmware alternative, checkout the guide below:
Welcome to PicoFarmLED!
Ok so you probably went through the "How to setup with arduino" guide, and thought you might want something more complete?
You're at the right place, if you wanted to start from scratch, check the guide below:
This type of power supplies have the advantage of being very powerful, some of them could power dozens of PicoFarmLED panels, but does not come with the wires, but don't worry this guide will take you through the setup:)
Check your local amazon, they all have a large number of variants for those, make sure it's 24v.
Selected region:
World
Click to change
Up to 2 panels max
Initially for motors, works with LEDs
Up to 7 panels max
Up to 7 panels max
Selected region:
World
Click to change
Up to 2 panels max
Initially for motors, works with LEDs
Up to 7 panels max
Up to 7 panels max