How to build
Tent kit LED holder
How to build the new tent LED holder guide.
This is the new model of 3d printable tent LED holder.
All parts from this guide can be used with the SuperGreenLab construction set.
What you'll need
Selected region:
World
Click to change
SGL Construction Set BY SuperGreenTomato
From SuperGreenTomatoAll the parts used for the SGL kits.
Free DownloadTent LED holder kit BY SuperGreenTomato
From SuperGreenTomatoAttach your SGL LED panels to your tent poles.
Holder wrist
Holder wrist
Push the transparent holder part into the arm's wrist.
Then add a 16mm screw to secure the holder in place.
Attach arm
Attach arm
Now attach the arm to the wrist, use a square nut on one side to screw everything together.
Attach tent pole clips
Attach tent pole clips
Now add a the pole clip to the arm.
And that's it, you have to do it 6 times now:)
Two different sizes
Two different sizes
You will notice that you have two different types, with two longer arms.
Usually the idea is that you will have the longer ones to hold the highest panels.
Done!
Done!
You can now clip all your holders as you wish.
Don't forget that it's better to spread your light power on a large surface, and from different angles!
Tighten the screws
Tighten the screws
Once the holder is glued to your furniture you can tighten the screws.
Don't over tighten is tho, just enough for it to stay in place.
Last remark
Last remark
The kit is shipped with 16mm (5/8") clips, some tents might have larger poles. Let me know if it's your case.
Welcome to
checkout our dedicated grow lights and join the community!